PARCHEM PRODUCTS RANGE:
| EMERCLAD
- ARCHITECTURAL COATING & WATERPROOFING MEMBRANE |
Description: |
|
|
The
Emer-Clad system comprises a single component water
based, high solids, acrylic copolymer waterproof membrane
coating applied over a range of primers dependent
on the substrate type.
Emer-Clad is available in either matt or satin finish.
Emer-Clad is a crack-accommodating coating containing
additives to inhibit the growth of mould, resist bacterial
growth and aggressive elements ie: UV light, chloride
ion and carbonation attack.
Emer-Clad dries to form an aesthetically pleasing
waterproof coating and may be applied by brush, roller
or airless spray.
|
| Uses: |
As
a decorative, waterproofing membrane coating to most
types of building facades, walls, roofs and gutters
after the recommended primer/sealer application.
Emer-Clad is suitable for application to many common
substrates including concrete, render, masonry, fibrous
cement products, metals, timber and bituminous membranes.
Some special priming may be required.
Emer-Clad also has approval for the safe encapsulation
of asbestos. |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
·
·
|
Proven
track record for over 25 years
Safe to use, water borne acrylic formulation
Easy water clean up
One component - readily applied direct from pail
Excellent resistance to UV, weathering, chloride ions
and CO2
Excellent build properties enable application to both
horizontal and vertical surfaces
Can be applied to a wide range of substrates
Available in a range of colours - able to be colour
matched
Highly flexible - accommodates movement and minor cracking
of substrates
Excellent resistance to embrittlement
Available in matt and satin finish
Download: Parchem Emerclad Architectural Coatings data
sheet
Download:
Parchem Emerclad Waterproofing data sheet
Download:
Parchem Emerclad COLOUR CHART*
Download:
Parchem Emer-Acrylic Sealer (water-based primer)
Download:
Parchem Emer-Coat Clear Sealer (solvent-based primer)
Download:
Parchem Emer-Bond Primer (waterborne, anti-corrosive
primer)
Download:
Parchem Emer-Clean (General purpose, phosphoric acid
based metal cleaner)
Download:
Parchem Emer-Coat Special Primer (Chemical resistant
primer)
Download:
Parchem Emer-Tan (tannin phosphate, rust-converter for
corroding metal, pre-painting treatment)
*Warning:
Waterproofing Warehouse accepts no responsibity for
incorrect colour matches. This display chart is for
basic reference only.
Actual colours may vary. |
|
| RENDEROC
HB (High Build) |
Description: |
|
Renderoe
HB, a lightweight concrete repair mortar, is supplied
as a ready to use blend of dry powders which requires
only the site addition of clean water to produce a highly
consistent, lightweight repair mortar. The material
is based on Portland cement, graded aggregates, lightweight
fillers and chemical additives and is polymer modified
to provide a mortar with good handling characteristics,
while minimising water demand. The hardened product
exhibits excellent thermal compatibility with concrete
and outstanding water repellent properties.
The low water requirement ensures fast strength gain
and long-term durability.
|
| Uses: |
For
the reinstatement of large areas of concrete and for
small, localised patch repairs. Renderoc HB is alkaline
in nature and will protect embedded steel reinforcement.
It is specifically designed for vertical and overhead
high-build applications. The mortar is suitable where
high-strength, as well as exceptional chloride and carbon
dioxide resistance is required.
Important note: this mortar is approved for use with
Norcure realkalisation. When using it in conjunction
with this method, the concrete bonding primer should
be an OPC:water slum. Polymer bonding agents should
not be used. No steel primer should be applied. Refer
to your local Parchem sales office for further advice. |
| Features
& Benefits: |
·
·
·
·
·
·
·
· |
Lightweight
formulation enabling extra high-build and thereby saving
time and expense of multiple applications
Reduces the need for formwork
Can be applied by the wet spray process for fast, exceptionally
high-build repairs with enhanced strength
Extremely low permeability provides maximum protection
against carbon dioxide and chlorides
Excellent bond to the concrete substrates
Shrinkage compensated
Pre-bagged to overcome site-batched variations - only
the site addition of clean water required
Contains no chloride admixtures
Download:
Parchem Renderoc HB data sheet
|
|
| RENDEROC
HB25 |
Description: |
|
| Renderoc
HB25 is supplied as a ready to use blend of dry powders
which requires only the site addition of clean water
to produce a highly consistent, lightweight repair mortar.
It is based on Portland cements, graded aggregates,
lightweight fillers and chemical additives which provide
a mortar with good handling characteristics while minimising
water demand. The low water requirement ensures good
strength gain and long-term durability. |
| Uses: |
Renderoc
HB25 exhibits a series of performance characteristics
designed to achieve maximum compatibility with concrete
with a compressive strength greater than 15 MPa.
For the reinstatement of large areas of concrete where
low permeability characteristics are required but where
high compressive strength is not the most important
consideration. Renderoc HB25 has been specifically engineered
for vertical and overhead repair work where its lightweight
nature makes it ideal. The mortar can also be used for
small, localised patch repairs. Where higher compressive
strengths are required as well as low permeability characteristics,
Renderoc HB40 or HB70 should be used. |
| Features
& Benefits: |
·
·
·
·
·
·
·
· |
Maximum compatibility with concrete of compressive strength
greater than 15 MPa
Lightweight formulation enables extra high-build - fewer
cold joints
Frequently obviates the need for formwork
Polymer-modification provides extremely low permeability
to water, carbon dioxide and chlorides
Exceptional system of shrinkage compensation provides
long-term dimensional stability
Can be applied quickly and efficiently by wet spraying
One component, pre-bagged to overcome site-batched variations
Contains no chloride admixtures
Download:
Parchem Renderoc HB25 data sheet
|
|
| RENDEROC
HB40 |
Description: |
|
| Renderoc
HB40 concrete reinstatement mortar is supplied as a
ready to use blend of dry powders which requires only
the site addition of clean water to produce a highly
consistent, medium-weight repair mortar. It is based
on Portland cements, graded aggregates, lightweight
fillers and chemical additives which provide a mortar
with good handling characteristics while minimising
water demand. The low water requirement ensures good
strength gain and long-term durability. |
| Uses: |
Renderoc
HB40 exhibits a series of performance characteristics
designed to achieve maximum compatibility with concrete
with a compressive strength greater than 30 MPa.
For the reinstatement of large areas of reinforced concrete
where low permeability characteristics are required
and where higher compressive strength is an important
consideration.
Renderoc HB40 has been engineered for the repair of
columns and beams but, because of its relatively low
fresh wet density,is also suitable for soffits and other
overhead repair work. The mortar can also be used for
small, localised patch repairs. Where compatibility
with lower strength concrete is required, but low permeability
and high-build characteristics are important, Renderoc
HB25 should be used.
|
| Features
& Benefits: |
|
·
·
·
·
·
·
·
·
· |
Maximum compatibility with concrete of compressive
strength
greater than 30 MPa
High-build applications possible while maintaining
higher compressive strengths - fewer cold joints
Frequently obviates the need for formwork
Polymer-modification provides extremely low permeability
to water, carbon dioxide and chlorides
Exceptional system of shrinkage compensation provides
long-term dimensional stability
Can be applied quickly and efficiently by wet spraying
One component, pre-bagged to overcome site-batched
variations
Contains no chloride admixtures
Suitable for internal and external applications
Download:
Parchem Renderoc HB40 data sheet
|
|
| RENDEROC
HB70 |
Description: |
|
| For
the reinstatement of large areas of concrete and for
small, localised patch repairs. Renderoc HB70 is alkaline
in nature and will protect embedded steel reinforcement.
It is specifically designed for locations where high
build and high compressive strengths are required or
in locations where good abrasion resistance is necessary.
The mortar is suitable where superior resistance is
required to chlorides and carbon dioxide. |
| Uses: |
| Renderoc
HB70 is designed for vertical or horizontal use. It
can be applied up to 40 mm thickness in vertical sections.
Greater thickness can be achieved in small pockets or
by the use of formwork. In horizontal locations, Renderoc
HB70 can be applied up to 150 mm thickness. Thicker
sections can be built up in layers. The material should
not be applied at less than 5 mm thickness. Thicknesses
greater than those nominated in large areas can be achieved
by spray application. Consult your local Parchem sales
office for further information. |
| Features
& Benefits: |
|
·
·
·
·
·
·
·
·
· |
High strength and high abrasion resistance
High build repairs
Extremely low permeability provides maximum protection
against carbon dioxide and chlorides
Excellent bond to the concrete substrate
Shrinkage compensated
Pre-bagged to overcome site-batched variations - only
the site-addition of clean water required
Can be applied by the wet or dry spray process for fast,
exceptionally high build repairs with enhanced characteristics
Contains no chloride admixtures
Suitable for internal and external use
Download:
Parchem Renderoc HB70 data sheet
|
|
| RENDEROC
LA55 |
Description: |
|
| Renderoc
LA55 is ideal for the reinstatement of large, structural
sections of concrete as well as for many smaller locations
where difficulties of access make hand or trowelapplied
mortars impractical. The highly fluid nature of Renderoc
LA55 obviates the need for compaction and vibration
even where access to the repair zone is restricted or
where reinforcement is congested. It is suitable for
use where excellent chloride and carbon dioxide resistance
is required or for repairs to concrete affected by alkali-silica
reaction (ASR). Renderoc LA55 is alkaline in nature
and will protect embedded steel reinforcement. The resistivity
of Renderoc LA55 make it suitable for electro chemical
repairs. |
| Uses: |
Renderoc
LA55 is supplied as a ready-to-use blend of dry powders
which require only the site addition of clean water
to produce a free-flowing, shrinkage compensated microconcrete
suitable for large volume repairs at a nominal thickness
in excess of 50 mm.
The material is based on Portland Cement, graded aggregates
and additives, which minimises water demand, promotes
high fluidity, ensures fast strength gain and longterm
durability. A unique system controls plastic and longterm
drying shrinkage. The aggregate grading is designed
to aid uniform mixing and to eliminate segregation under
pumping pressures. Its low alkali content minimises
the risk of alkali–silica reaction. The hardened product
exhibits excellent thermal compatibility and very low
water permeability. |
| Features
& Benefits: |
|
·
·
·
·
·
·
·
·
· |
Unique system offers an extremely high level of control
of plastic and long-term drying shrinkage
Low alkali content minimises risk of alkali-silica reaction
Excellent bond to concrete substrates without independent
primer
Exceptional flow allows pumping or pouring into restricted
locations
Self-compacting nature eliminates honeycombing and displaces
air without vibration
Very low permeability provides excellent protection
against carbon dioxide and chlorides
Pre-bagged to overcome site-batched variations - only
the site addition of clean water is required
Contains no chloride admixtures
Suitable for electro chemical repairs
Download:
Parchem Renderoc LA55 data sheet
|
|
| RENDEROC
FC |
Description: |
|
Renderoc
FC cementitious fairing coat is supplied as a ready
to use blend of dry powders which requires only the
site addition of clean water to produce a highly consistent
cementitious fairing mortar.
The material is based on a blend of cements, graded
aggregates, special fillers and chemical additives to
provide a material with good handling characteristics,
while minimising water demand.
The product exhibits excellent thermal compatibility
with concrete and is fully compatible with other Renderoc
mortars and Dekguard coatings. |
| Uses: |
Renderoc
FC cementitious fairing coat is designed for application
in thin layers to produce a fair-faced appearance to
concrete surfaces or masonry surfaces in readiness to
receive a protective/decorative coating.
Surface imperfections up to 3 mm in depth can be filled
with the scrape coat application. Voids of greater depth
should be separately filled as a prior operation, again
limiting the material thickness to 3 mm. Renderoc FC
can be used independently to infill surface imperfections
and voids or to render large sections of concrete, brickwork
or masonry at up to 3 mm thickness. It can also be used
in association with other Renderoc mortars. Under normal
conditions, the product does not require an independent
primer or curing membrane. |
| Features
& Benefits: |
|
·
·
·
·
|
Easy to use - no independent primer or curing membrane
necessary
Excellent bond to the concrete substrate
Pre-blended to overcome site-batched variations - only
the site addition of clean water is required
Contains no chloride admixtures
Download:
Parchem Renderoc FC data sheet
Download:
Parchem Renderoc FC Architectural Data Sheet
|
|
| VANDEX
PLUG |
Description: |
|
| Vandex
Plug is a one-component, rapid setting, readymixed,
cementitious, waterproof plugging mortar which is ready
for on-site application to leaking cracks and water
seepage areas in concrete, stone and all types of masonry
after mixing with water. |
| Uses: |
Rapid
setting, permanent plugging of water seepage through
porous concrete and fast flowing water through cracks
and construction joints in concrete and masonry.
Applications include plugging in-situ and precast concrete
segments in tunnels, water storage tanks, sewerage mains
and processing tanks, basements, blow ground car parks,
access chambers, building foundations and mines.
Vandex plug is effective in sealing water leaks through
concrete, concrete block walls, brickwork, earthenware
and all types of stone and masonry. |
| Features
& Benefits: |
|
·
·
·
·
·
·
·
·
·
·
· |
Highly abrasion resistant
Stops water flow
Sets in approximately 30 seconds after mixing
Permanent durable repair
Works on concrete, brick, stone and all types of masonry
Can be installed underwater
Non-toxic
Can be mixed with water or used as a dry powder
Easy application
Colour compatible with the host concrete
Packed in convenient resealable plastic containers
Download:
Vandex Plug data sheet
Download:
Vandex Plug 'Application' Data Sheet
|
|
| EMER-SEAL
CR (Chemical-Resistant) - (formerly Chemproof) |
Description: |
|
| Emer-Seal
CR is a one part, sausage gun applied non-sag joint
sealant designed for sealing expansion and construction
joints exposed to aggresive chemical environments. Emer-Seal
CR utilises unique polymer technology which provides
outstanding chemical resistance and cures by reaction
with atmospheric moisture to form a tough flexible seal.
Once cured, Emer-Seal CR is resistant to attack from
most of the aggresive chemicals used in the food, mining
and chemical processing industries. |
| Uses: |
·
·
·
·
·
· |
Bund
Areas
Floor joint in chemical procesing plants
Concrete joints exposed to acid spillage
Swimming Pools
Sewerage processing tanks
Food, wine and citrus processing areas |
| Features
& Benefits: |
·
·
·
·
·
·
|
Ready
to use
Fast rate of cure
Long life weathering resistance
Highly resistant to biological attack
Highly resistant to a wide range of chemicals including
strong acids & alkalis
Highly resistant to pool chlorine, salt water chlorination
and ozone treatment
Download:
Parchem Emer-Seal CR data sheet |
XWaterproofing
Warehouse also carries Parchem's Supercast PVC Waterstops.
The Supercast range of PVC waterstops is designed to
provide an integral sealing system for movement and
construction joints in concrete cast in-situ. We carry
the Supercast Reargard 'R' for swimming pool constructors
but can get in Xany size
you require in the range.
Download
data sheet here:-
Supercast
PVC Waterstops
HOME
|
|
|
