| |
| |
| |
| Description: |
|
Hydrotite
is a hydrophilic waterstop which exibits excellent durability
and water sealing capacity. It expands as it absorbs water
and fills up concrete joint gaps conforming to the gap variation,
ensuring excellent sealing. Hydrotite is based on the technology
of hydrophilics, a material which expands in a controlled
fashion by approximately eight times by volume in the presence
of moisture to create a pressure seal within the joint.
When properly installed Hydrotite is capable of sealing
heads of water up to 50 m and is used throughout the construction
industry to seal horizontal and vertical construction joints
for poured in-situ concrete.Hydrotite is a hydrophilic waterstop
which exibits excellent durability and water sealing capacity.
It expands as it absorbs water and fills up concrete joint
gaps conforming to the gap variation, ensuring excellent
sealing. Hydrotite is based on the technology of hydrophilics,
a material which expands in a controlled fashion by approximately
eight times by volume in the presence of moisture to create
a pressure seal within the joint.
When properly installed Hydrotite is capable of sealing
heads of water up to 50 m and is used throughout the construction
industry to seal horizontal and vertical construction joints
for poured in-situ concrete. |
| Uses: |
Hydrotite
is to be used where watertight integrity is the prime issue.
Typical applications where there is a need to achieve a
water seal include:- Sewerage treatment plants, Pipe
penetrations, Subway stations, Water treatment plants, Swimming
pools, Basements, Reservoirs, Tunnels, Pits
Below are HYDROTITE Profiles available -
|
| Features
& Benefits: |
| ·
Self-adhesive
properties makes installation much easier and reduces
xxconstruction costs
·
Co-extruded
design means expansion is directed across the joint for
xxmaximum seal
·
Unaffected
by repeated wet and dry cycles
·
No
site welding as is required for traditional PVC waterstops
·
Has
a delay coating to help prevent premature expansion
·
Extra
cans of delay coating are available if required
·
Changes
colour as a visual alert to let you know it has expanded
·
No
need for special intersections, joining is by simple butt
joins
·
Can
be applied to rough surfaces using Leakmaster (or Adeka
P-201) xgun grade waterstop
·
Easy
to handle and install
·
Can
be joined to traditional PVC waterstop
·
No
compaction or displacement problems
·
Non
toxic and non hazardous
·
No
need for split forming
|
If you
require this type of material to be specified on a job, please contact
Waterproofing
Warehouse and we can get a representative to help out to make sure
the material suits your job. |
|
