| |
| |
| |
| Description: |
|
| Shower
Fix/Grout Sealer eliminates leaks in shower alcoves quickly
and easily without removing the tiles. Shower Fix is a siloxane/solvent
based material that penetrates deep into the grout and porous
tiles, forming a water-repellent barrier. It is a not a
coating, coatings fail if chipped or scratched and wear
due to ordinary cleaning. Coatings need to be reapplied
constantly and once damaged are next to useless. |
| Uses: |
·
·
|
Shower
Fix prevents moisture getting behind tiles which can cause
cracking, rusting and mould.
It is used in standard shower alcoves (recesses) where there
may be problems or water going through the wall and dampening
a wall opposite the shower itself. |
| Features
& Benefits: |
·
·
·
·
·
·
·
· |
Clear
and odourless
Simple and fast to apply
Allows grout and tiles to breathe
Is not a coating, does not fail due to chips or scratches
in the grout
Do not have to remove tiles
Is recommended that existing silicone or grout in corner
areas (only) be removed and replaced so an even better
seal can be achieved
A 500ml tin can cover up to 15m2
Clean up with mineral turpentine
Download:
Shower Fix/Grout Sealer data sheet |
|
|
Description: |
|
| A
clear solvent based sealer that penetrates deep into the
concrete and masonry surfaces and hydrolyses in the pores
and capillaries forming a weather and chemical barrier without
changing the appearance. It leaves no 'gloss' finish and
the only way to tell it has been applied is to pour water
onto the area and watch your porous surface 'resist' any
water standing on it. |
| Uses: |
·
·
|
Apply
to concrete, bricks, stone and masonry surfaces to preserve
its original appearance
Repels water that sits on the treated surface area (the
water beads up and rolls off the surface if there is any
slope on the area). |
| Features
& Benefits: |
·
·
·
·
·
·
·
· |
Quick
acting - will repel water in 2 hours
Long lasting tests have shown years of dependable
protection
Seals surface from moisture and protects surface from
atmospheric chemical attack
Will not darken or yellow with age
Reduced weather staining - vertical surfaces tend
to be self cleaning
May be recoated any time
Covers 8-10m2 per litre/per coat (must have 2 coats)
Can be applied with backpack pump spray, brush or
roller
Download:
Natural Sealer data sheet |
|
|
|
