| |
| |
| |
| Description: |
|
| Bostik
Ultraseal is a high performance flexible one component
trowel/brush or roller applied polyurethane waterproofing
membrane specifically designed for wet area applications.
Ultraseal can be over-applied with conventional grout
toppings or ceramics adhesives prior to application
of wearing toppings or surfaces (such as tiles, etc.)
- This is a highly recommended product of Waterproofing
Warehouse, we have only received positive comments! |
| Uses: |
·
·
·
·
· |
Waterproofing
internal and external wet areas.
Waterproofing balconies, podiums, kitchens, toilets,
bathrooms, floors and walls prior to application of
surface wearing toppings.
Use on concrete slabs, cement rendered concrete, masonry,
fibre reinforced cement sheeting, water resistant plasterboard
and plywood.
Waterproofing shower recess bases.
Waterproofing and sealing planter boxes. |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
·
·
·
· |
Creates
a tough elastomeric waterproofing membrane when fully
cured.
Excellent chemical resistance.
Low odour polyurethane membrane.
Free of pitch or bitumen modification.
Will not bleed through porous materials such as marble,
natural stone, slate tiles or grouting.
Non re-emulsifying.
Ready to use, no mixing required.
Excellent workability.
Early access for following trades.
Tenacious bond strength to virtually all common building
substrates.
Reaches sufficient cure generally in 24 hours allowing
for toppings or coverings to be placed.
Ultraseal is A.B.S.A.C. appraised, No. 197
Ultraseal packaging is available in 600ml Sausages
(small areas, e.g. shower recesses)
Ultraseal 'R' (Rollable grade) is available in 600ml
Sausages, 4 ltr & 15 Ltr Buckets
Download:
Bostik Ultraseal data sheet
|
|
|
Description: |
|
Seal
"N" Flex 1 is a low modulus, one component,
Class A polyurethane sealant. When cured it will form
a tough, flexible seal capable of cyclic expansion and
compression movement of 50%(+ 25%) of the original joint
width.
Seal ‘N’ Flex 1 is virtually unaffected by normal weathering
conditions such as rain, sunlight, snow, sleet, ultra-violet
radiation, ozone, atmospheric contamination and pollution.
Its excellent durability enables it to retain its original
properties after years of exposure, refer to the CSIRO
RILEM LONG- TERM SEALANT DURABILITY STUDY DBCE Doc.
97/196 (M). |
| Uses: |
·
·
·
·
·
·
·
·
· |
Sealing
joints in:
Insitu concrete
Precast and tilt up panels
Brick & blockwork
Plasterboard
Aluminium windows
Granite, sandstone and marble
GRC, Fibreglass & Specialty panel systems
Metal curtain wall
Water tanks
|
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
·
·
·
· |
Australian
made
Low modulus 50%(+ 25%)
Excellent durability
One component, no mixing required
Good Colour range
Acoustic rating
Paintable (refer limitations)
Non staining• Low modulus 50%(+ 25%)
Excellent durability
One component, no mixing required
Great Colour range(more colours in 600ml Sausages)
Acoustic rating
Paintable (refer limitations)
Non staining
Download:
Bostik Seal n' Flex1 data sheet
Coverage:
please see the
'Joint
Sealant Quantity Estimation Chart'
Also
our NEW
BOSTIK SEAL n' FLEX COLOUR CHART (click this link)
|
|
| |
| Description: |
|
| When
fully cured Seal 'N' Flex FC will provide a tough, flexible
seal capable of cyclic expansion and compression to
50% of original joint width without primer on most substrates.
Seal 'N' Flex FC is unaffected by ultra-violet radiation,
atmospheric contamination or pollution. Its excellent
weatherability enables it to retain its original properties
after years of exposure. (C.S.I.R.O RILEM exposure study). |
| Uses: |
·
·
·
·
·
|
Trafficable
- Plats, stairs, roads, runways, aprons and pavements.
Vertical - Precast, blockwork, aluminum, plasterboard,
timber and most common building substrates.
Pick resistant - Prisons, cells, schools and public
amenities.
Chemical resistant - Service stations, hangers, aprons
and bunded areas.
Fungal resistance - Wet areas, wash down bays, food
processing. |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
· |
Australian
Made ISO 9002
Aromatic Technology -No priming required on most substrates.
U.V Resistant - No discolouration
+ 25% Movement - Low modulus elastomeric sealant.
Abrasion & Pick Resistant - Security applications
Shore A 50 - Trafficable applications
AS 4020 - Potable water approval.
Excellent Chemical Resistance - Petroleum & wash
down environments.
Resistant to Fungal attach AS 1157.2 - Chicken, poultry
& food environments.
Acoustic Properties
Paintable
Download:
Bostik Seal n' Flex FC data sheet |
|
| |
| Description: |
|
| Fireban
one is a fire rated, single component, low modulus polyurethane
sealant curing via air humidity to form a elastomeric
weatherproof fire rated seal. This product is normally
used on the exterior of a building as it can handle
better conditions than Bostik Firecaulk. |
| Uses: |
·
·
·
·
|
Sealing
joints in expansion and construction joints in precast.
Sealing joints in insitu concrete, block and brick
work.
Penetration and core hole sealing in conjunction with
fire collar or pillows or in areas requiring intumescent
sealing
Sealing acoustic joining |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
· |
High
durability
Excellent weathering resistance
Can be over painted
Non staining
50% total joint movement minimum
Australian made
Excellent acoustic ratings (up to 45 STC)
Acoustic Joint sealing
Fire rated up to 4 hours
Download:
Bostik Fireban One data sheet |
|
| |
| Description: |
|
Bostik
Firecaulk is a single component, non-sag, fire rated
acrylic based gunnable sealant. A general purpose product
for construction joints and the sealing of service penetrations
in plasterboard, concrete floors and masonry wall constructions.
Bostik Firecaulk is a gun grade acrylic based sealing
compound specifically manufactured for sealing low movement
interior joints (less than12.5%) in masonry and plasterboard
to provide a fire barrier for periods up to 4 hours. |
| Uses: |
·
·
·
·
·
·
·
·
·
·
· |
Sealing
of gaps around pipes, cables, ducts and services which
penetrate fire rated walls and floors.
Fire rated cable penetration in concrete and masonry.
Installation of fire rated sealant in concrete walls
and floors.
For vertical and horizontal joints, interior or exterior.
Application requiring acoustic properties or STC rating.
Sealing construction and expansion joints.
Sealing joints in pre-cast panels.
Perimeter sealing of door and window framing.
Sealing gaps between faced and cladding panels to
various building materials.
For new construction and remedial applications.
To prevent the spread of fire and smoke through walls
and floors. |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
· |
Fire
resistance when tested in accordance with AS1530.4-1998,
BS476: Part 20: 1987 and AS4072.1-1992
Fire rating for gaps up to 50mm.
Designed for Australian conditions.
Good flexibility joint movement 12.5%
One part no mixing required.
Very easy to apply and gives a smooth finish.
Smooth gunnability and tool off finish
Low odour
Non-toxic
Asbestos free.
Priming not normally required.
Water clean up.
Prevents the passage of hot gases.
Paintable after 24 hours at 20°C.
Water resistant after cure (7 days after application).
Excellent adhesion to metal, wood, plasterboard and
all masonry
Acoustic capabilities with STC rating in plasterboard
construction.
Download:
Bostik Firecaulk data sheet |
|
| |
| Description: |
|
| Boscoseal
PU is a one-part coal tar free bitumen modified, moisture
curing polyurethane membrane. After curing it provides
a tough highly elastomeric, impervious barrier to moisture.
Suitable for application by brush, roller or trowel. |
| Uses: |
·
·
·
· |
Waterproofing
of masonry walls, foundations and basements
Waterproofing roof lap slabs, balconies, courtyard
Waterproofing under to terrazzo pawing and quarry
tiles
Waterproofing planter boxes |
| Features
& Benefits: |
·
·
·
·
·
·
· |
Coal
tar free
One Part Polyurethane (no Mixing)
Early access for following trades
Brush, roller or trowel applied
Does not brittle with age
Exhibits tenacious adhesion to masonry
Non re-emulsifying
Download:
Bostik Boscoseal P.U. data sheet |
|
| |
| Description: |
|
One
part solvent free polyurethane elastomeric adhesive
formulated to adhere most types of wood, parquet, strip
and sheet timber flooring systems to concrete, timber,
or over existing
floors. |
| Uses: |
·
·
·
· |
Adhering
Parquetry to concrete or timber
Strip flooring
Underlay, prior to application of timber flooring
Tiles to concrete/timber |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
·
· |
Solvent
free formulation
No mixing, ready to use
One component
Flexible
Easy to spread
Will not re-emulsify when in contact with moisture
Colour Range (brown standard)
Tested to ASTM C794 for peel adhesion to various species
of Australian Hardwood
Non-flammable
Recommended adhesive by major timber manufacturers
Excellent acoustic properties
Australian made
Download:
Bostik Ultraset SF data sheet |
|
| |
| Description: |
|
Bostik
have two polyurethane joint sealant primers for use
on porous and non-porous substrates.
N49 primer is used for porous substrates
including concrete, sandstone,AC compressed sheeting
and any other materials that can handle a solvent-based
primer.
N40 is used for non-porous substrates
including metals, etc.
(Please refer to a Bostik representative for correct
specification). |
| Uses: |
·
· |
N49
- Used for all porous substrates and immersed applications
N40 - Used in conjunction with Bostik 5077 Cleaner for
any non-porous substrates. |
| Features
& Benefits: |
|
On
some jobs, primers may not be necessary but they are
highly recommended by Bostik for critical substrate
adhesion.
They do a vital job of securing the sealant to the
side of the joint so that when joint movement occurs,
the primer stops the sealant letting go from the side
of the joint. |
|
| |
| Description: |
|
| Bostik
Expanda Foam is easy to dispense and install through
the straw adapter included with each can and will expand
to fill gaps of all dimensions in the most difficult
locations. It will greatly reduce noise, dust and draughts
and will block access by rodents. |
| Uses: |
·
·
·
· |
Expanda
Foam is a great insulator against heat and cold
The foam has powerful adhesive properties, bonding
well to:-
timber, brick, concrete, galvanised steel, aluminium,
glass,
fibre cement sheet and plasterboard
Expanda Foam will not shrink and cures to an airtight,
moisture resistant seal
The cured foam can be cut, sanded and painted to a
neat finish. |
| Features
& Benefits: |
·
·
·
·
·
·
|
Pest
and vermin proof
Ozone Safe
Exterior or interior use
Fills large or small gaps
Seals, fills, bond, insulates
Can be cut, sanded, plastered or painted
Download:
Bostik Expanda-Foam data sheet |
|
|
