| |
| |
| |
| Description: |
|
P-201
is a single component hydrophilic paste used in water-stop
and repair applications. It can be placed on damp or uneven
surfaces and
functions in a wide range of temperatures and ground water
conditions.
Many pool builders purchase this excellent material from
the Waterproofing Warehouse
- Gold Coast |
| Uses: |
·
·
|
Water
stoppage at concrete joints
Waterproofing around all inlet and outlet pipes e.g. in-ground
swimming pools
 |
| Features
& Benefits: |
·
·
·
·
·
·
·
·
·
·
·
· |
Excellent
adaptability owing to the self-swelling property when
touching with water as one-component
Perfect stopping when swelled by water (maximum: double)
Will adhere to various materials such as concrete, glass,
metals,etc.
Able to be applied to a wet surface
Durable long lasting protection
Maximum expansion of two times by volume
Used as a waterstop by the way of a singular product
Adheres to concrete, metals, glass, PVC, fiberglass,
etc.
Can be applied in damp conditions
Applicable to uneven or rough surfaces
Has good chemical contaminant resistance
Excellent for piping penetrations
|
|
|
Description: |
|
MC-2010MN
is a chemically modified natural rubber product. This
patented process chemically bonds a hydrophilic agent
to the rubber. This permits the seal to undergo controlled
expansion when exposed to moisture. This expansion capability
provides a "double locking" water-stop. One
from rubber's natural resilience and one from expansion.
Expansion occurs in three dimensions: width, height, and
length. MC-2010MN has a unique stainless steel wire mesh
embedded within the material. The wire mesh eliminates
unnecessary expansion in the length and width dimensions.
When fastened to concrete, the wire mesh prevents "winding"
action and directs the expansion. |
| Uses: |
·
* |
Used
in general below grade concrete joint work where water
intrusion must be prevented. MC-2010MN is designed to
replace conventional waterstop. It is also used for piping
penetrations where pipe diameter exceeds 600mm (24").
NOTE: MC-2010MN must be placed between two rows of
rebar. The required concrete coverage varies from 100-130mm
(4" ~ 5") depending on concrete strength. For
example, if concrete psi is 4260 or greater the required
concrete coverage must be greater than 85mm (3.25").
If the concrete psi is 2550 or less, the required coverage
is greater
than 100mm (4"). |
| Features
& Benefits: |
·
· |
The
Ultraseal MC-2010MN is used as a waterstop in many substrates,
e.g. raising the existing height of a standard swimming
pool, below ground level construction & many more
features.
It has reinforcing wire running through the centre of
the material to keep strength and reliability to a maximum. |
|
| |
| Description: |
|
| KBA-1510FP
is a compressible, hydrophilic rubber waterstop. KBA 1510FP
is 15mm X 10 mm in cross section and comes packaged in
25 meter (82 feet) per case. |
| Uses: |
The
product is designed for non-moving joints. Because of
its low expansion pressure, it can be used in areas with
a minimum of one inch of good quality concrete coverage.
Lower expansion pressure allows the product to be used
between the wet face of the concrete and the rebar provided
there is a minimum of one inch of concrete coverage. Placing
KBA-1510FP in this position will protect the rebar from
moisture.
KBA-1510FP is suitable for use between non-moving pre-cast
segments where tolerances are within the limits of KBA-1510FP
(KBA-1510FP must be compressed in all areas). |
| Features
& Benefits: |
| NO
LEAKAGE at 0.20 MPa (28.4 psi - approximately 57 foot
hydrostatic head).
WATERPROOFING WAREHOUSE
provides this material per metre or per 25Lm roll.
Download:
Adeka Ultraseal KBA-1510FP data sheet
|
|
|
